To sell to an engineer who specifies products, give them something they can defend with a stamp: performance data, a clear basis of design and a submittal they can drop into a drawing set. An engineer is not choosing what looks good. A licensed engineer of record is choosing what they will be responsible for if it fails. So you win by lowering that risk, one project at a time, and you write to the person who names products in Divisions 22, 23, 26, 31 or 33. Architects work differently, and how to sell to architects covers them. This page is for the engineer behind the mechanical, electrical, plumbing and civil sheets.

Who actually names your product

In US construction, specifications are commonly organized by MasterFormat, the division system published by the Construction Specifications Institute (2018 edition, read 2026-11-15). Engineers write the divisions for their discipline:

  • Division 22, plumbing, and Division 23, heating, ventilating and air conditioning: the mechanical engineer.
  • Division 26, electrical, including power distribution and lighting: the electrical engineer.
  • Division 31, earthwork, and Division 33, utilities: the civil engineer.

Find which division your product lives in and you know which discipline to write to. A pump or a damper goes to the mechanical engineer. A lighting control panel goes to the electrical one. A storm drainage product goes to the civil one. If your product spans two, pick the one who has to carry the performance claim.

What engineers weigh that architects do not

Architects often care about look, feel and how a product sits in the design. Engineers care about whether the number on your data sheet is the number in the building.

  • Calculation fit. They need to size it. Give them the tables, curves or selection software they need to do it in ten minutes, not a brochure.
  • Code and listing. If a standard applies, name it and say which part of your product meets it. Do not claim a listing you do not hold.
  • Substitution. Many specs name a basis of design and then allow "or equal." If your product is the one named, a contractor has to meet that spec or prove an equal. That is what you are trying to become.
  • Liability. They would rather use something they have used before. A project where your product performed is worth more than any sales email.

Find the engineers by name

State engineering boards publish license lookups, so you can confirm a name and an active license; some boards also show the discipline. Firm websites list their mechanical and electrical engineers on team pages. Project records often show the engineer of record for permitted work, and your own distributor or manufacturer's rep can tell you which firms specify competitors in your category. Start with firms, not individuals: a ten-person MEP firm has a handful of people who name products, and the principal often decides which ones. How to get engineering consulting clients is the mirror image of this page, for an engineer selling their own hours.

A worked example with the arithmetic

Tamsin Greer sells packaged energy-recovery ventilators, a Division 23 product, through a regional distributor. She lists 60 mechanical engineers at 25 firms. The following figures are assumptions, there to show the method: suppose 1 in 10 agrees to a meeting, 1 in 3 of those names her unit as basis of design on a project within a year, and each project buys $40,000 of units through the mechanical contractor.

  • 60 engineers divided by 10 is 6 meetings.
  • 6 meetings divided by 3 is 2 projects.
  • 2 projects at $40,000 is $80,000 in units, bought by contractors and not by the engineers.

Two cautions. The money arrives months after the spec, because design, bidding and purchase take time. And the engineer never sees an invoice, so your relationship with the contractor and distributor matters as much as the spec. Take the real numbers from your first 60 contacts and replace the ones here.

The first email

One message, one product, one thing the engineer can use immediately. It carries a physical postal address and a plain opt-out line, which the FTC's CAN-SPAM requirements call for (16 CFR Part 316, FTC compliance guide read 2026-11-15; opt-outs must be honored within 10 business days).

Subject: Selection data for Division 23 energy recovery

Hi {{first_name}}, I sell packaged energy recovery ventilators and I have a one-page selection sheet and a CAD file for the 1,000 to 5,000 cfm range that you can drop into a schedule. Would you like them to look at for your next air handling spec? I can also answer sizing questions by email.

Tamsin Greer, [Company name], 100 Example Street, Suite 4, Springfield, ST 00000. Reply "stop" and I will not write again.

It makes no claim about savings and does not ask for a spec. It offers a file they can open without talking to anyone. The address is a placeholder.

Earn the second project

A lunch-and-learn works with engineers when it earns professional development credit. Continuing education rules for keeping a license differ by state, so look up your state engineering board before you promise that a session counts. Government engineers may be limited by state gift and ethics rules on meals, so ask the agency before you offer food.

After a project goes in, send the engineer the as-built performance. A real number from a real building is the single most persuasive thing you hold, and it gets you onto the next job. If your product also goes to the plant that makes things, how to sell to manufacturers covers the buyer on that side of the same supply chain.

What not to do

  • Send a catalog. Send the one sheet for the one product that matches their project type.
  • Claim a rating, listing or savings figure you cannot document. An engineer will check, and a wrong claim ends the relationship.
  • Go around the engineer to the owner. The owner rarely names the product, and engineers notice.
  • Ask for exclusivity early. Ask for consideration on one project first.

If you want help doing the list and the first-touch email work for a spec product like this, Rocketship finds the people you describe, emails them from your own Gmail, answers replies and books the meeting. It starts at $12 a month on a 7-day trial that requires a card; the pricing page has the plans. It will not size a unit or write a spec.