To sell to a general contractor you need three things in hand before you send a message: a prequalification packet, a current insurance certificate, and an answer to how you will carry retainage, the share of every payment the contractor holds back until the job closes. Then you write to the estimator or preconstruction manager, not a general inbox, with one specific offer. General contractors buy on a bid calendar and a paper trail, so the seller who is easy to approve gets considered first. This page is about commercial and B2B work: the people who build offices, warehouses, clinics and schools, not homeowners.

Finding the contractors is a different job, covered in how to find general contractors to sell to. This page picks up when you have a name and need to be worth a reply.

How a general contractor actually buys

A general contractor wins a job by pricing it, and prices it from the quotes of subcontractors and suppliers collected before a bid date. So the moment that matters to you is the weeks before a bid goes in. A supplier who is already on the contractor's bid list, with a price ready, gets in the number. A supplier who emails after the bid is awarded is told to come back for the next one. When you open a conversation, ask for the next bid you can price, not for a meeting about your company.

Bigger contractors keep an approved list. To get on it you complete a prequalification form that asks for your financials, safety record, insurance and references. Smaller ones, often owner-run, decide on a phone call and a quote. Learn which kind you are writing to from their website: a "subcontractors" or "prequalification" page means a form.

The paper to have ready

  • A prequalification packet. One PDF: company details, years in business, three recent jobs of similar size with a contact for each, and your safety record.
  • A certificate of insurance. General liability and workers' compensation are the usual asks, and many contractors want to be named as an additional insured. Ask your insurance agent how fast you can get a certificate reissued, because a bid can hinge on it.
  • Your W-9 and license numbers. Most contractors will not set you up as a vendor without them.
  • Your lien waiver practice. Contractors ask for a lien waiver with each payment. The rules and the forms differ by state: in California a progress-payment waiver is unenforceable unless it is in substantially the statutory form (Civil Code section 8132), and Texas has the same kind of rule (Property Code section 53.284), both read 2026-11-15. Check the contractor's form against your state's and have your own signing authority clear.

Retainage: what it does to your cash

Retainage is the part of each progress payment the contractor holds back until the job is complete. The rate depends on the contract and sometimes on the law. California Public Contract Code section 7201 caps retention on public works at 5 percent of the contract price (with exceptions the section sets out for specific complex projects), and the amount a prime contractor can hold from a subcontractor cannot exceed the percentage in the owner's contract (page verified current on 2026-11-15, the code section updated January 1, 2023). On private jobs in California, Civil Code section 8811 now applies the same 5 percent cap to contracts entered into on or after January 1, 2026, except on residential projects of four stories or fewer that are not mixed use (read 2026-11-15). Texas Property Code section 53.101, as amended effective January 1, 2022, requires the owner on a job where a mechanic's lien may be claimed to reserve 10 percent of the contract price, or of the value of the work done, while the work is going on and for 30 days after it is complete (read 2026-11-15). For federal work, 40 U.S.C. 3131 requires performance and payment bonds on construction contracts of "more than $100,000", and the Federal Acquisition Regulation that agencies follow sets the current figure at contracts exceeding $150,000 (FAR 28.102-1, read 2026-11-15). Rules vary by state, and a private contract in a state with no cap can set any rate the parties agree to, so check the state where the job sits before you price.

Here is the cash effect with an assumption. Suppose you win a $200,000 subcontract and your profit on it is 8 percent, or $16,000. At 5 percent retainage the contractor holds $10,000 until close-out, which is 62.5 percent of your profit. At 10 percent it holds $20,000, which is more than the whole profit, and you are financing the job. The same math shows how to answer when a contractor asks for a discount: a 2 percent price cut on $200,000 is $4,000, a quarter of the profit.

Who to write to

At a mid-size contractor the person who decides which subcontractors and suppliers get a bid is usually the estimator, the preconstruction manager or a project manager. At a small, owner-run contractor it is the owner. Rocketship finds business buyers like these, by role and location, so you can ask for "estimators and preconstruction managers at commercial general contractors in the Phoenix area". The people it finds are people at companies, not homeowners. How to approach the person who signs off is in how to get meetings with decision makers.

A first message that gets a reply

One email, one ask, and the paper offered rather than attached. The postal address and opt-out line are there because the FTC's CAN-SPAM compliance guide (read 2026-11-15) says every message needs a valid physical postal address and an opt-out honored within 10 business days.

Subject: Pricing for your next commercial bid

Hi {{first_name}},

We supply and install fireproofing for commercial jobs from 20,000 to 150,000 square feet. If you have a bid coming up in the next few weeks, I can price it from the drawings within a few working days. Our prequalification packet and current insurance certificate are ready, and I can send them with the number.

Which bid should I look at first?

Dana Okafor
[Company name], [street address, city, state, ZIP]

If you would rather not get emails from me, reply "stop" and I will remove you.

The offer is a price on a real bid, not a capabilities deck. The one question at the end makes the reply a single sentence. If you would rather call, the cold call script for general contractors has the phone version.

What to expect, and how to measure it

Contractors are busy, and many replies come when a bid is open. Treat the first 50 contractors in one metro area as a test. Count replies, bid invitations and invitations that turn into a priced quote. If you get bid invitations but lose on price, the problem is your price. If you get no replies, the problem is the message or the list. Do not expect a bid invitation to turn into a job on the first try; the win comes from being on the list for the second and third.

Rocketship starts at $12 a month, with a 7-day trial that takes a card. It finds the people, emails them from your own Gmail, answers replies and books the call. It will not price the bid or win the job.